Maintenance; General Recommendations; Lubrication - Pecol V20 Brushless RBPROHP Manual Del Usuario

4. Maintenance

4.1. General recommendations

• Always make sure that the machine is switched off and the plug is disconnected
before any intervention.
• Always keep the machine clean, especially the ventilation grids and switch. Do not use
sharp objects to perform any cleaning.
• Regularly clean with dry compressed air to remove dirt and metal particles from
inside the machine. These accumulated elements can damage it. Always wear gloves
and safety glasses in this operation.
• Never use chemicals for cleaning as they may degrade various components of the
power tool. The following examples are not recommended: solvents, silicone based
products, gasoline, ammonium based products, carbon chlorides, etc. Use only a cloth
moistened with mild soap. Do not allow liquid to enter the machine.
• For complex maintenance, refer the power tool to the PECOL Technical Assistance
Service.
• If damage or malfunction occurs, do not operate the machine and send it to PECOL
Technical Assistance Service.
• Only use PECOL accessories and spare parts, tested and with guaranteed quality and
compatibility. To access specific accessories and spare parts for your power tool, go to
our website via QR Code or link.
www.pecol.pt/accessories/v20brushlessrbprohp.html

4.2. Lubrication

The lubrication of this machine is intended to last long periods of use. The machine
must be kept clean and free of dust. An inspection must be carried out for checking and
cleaning in case of more intense use. The frequency of inspections should be adjusted
according to the conditions of use. Ventilation grilles should be kept clean and free
of any obstruction to the airflow. If you notice any change of operation, refer to the
Troubleshooting Chart, refer the power tool to the PECOL Technical Assistance Service
for proper replacement and revision.
P.62
PT ES EN FR