Using the microscope
LED settings
In order to activate the transmitted light illumi-
nator, insert the plug of the power supply cable
into the socket and turn on the main switch on
the back of the main body. Turn the brightness
adjustment knob to a brightness suitable for
observation. (Fig.7)
Adjust the observation
head
Loosen the lock-screw, turn
the observation head to
a comfortable position for
observation, and then lock the
lock-screw. (Fig.8)
Adjust interpupillary
distance
Hold the right and left parts of
the observation head using
both hands and adjust the
interpupillary distance by
turning the two parts until one
circle of light can be seen.
(Fig.9)
Place the specimen on
the stage
Fix the specimen slide on the
mechanical stage using the
slide-clamp. Ensure that the
specimen is centred over the
stage opening. (Fig.10)
MAIN
SWITCH
Page 9
Fig.7
Fig.8
Fig.9
Fig.10