oneConcept 10033139 Manual De Instrucciones página 18

EN
18
• INDOOR USE ONLY
• Choose a correct location for the heater in taking in account the safety
instructions:
• To hang you heater on the wall: Drill two holes at the level of the slots
located at the back of the heater then put two pegs in the holes.
• Hang the heater to the wall by inserting the two screws into the slots of
the back panel of the heater the fix the screws on the pegs.
Note: Always be sure that the heater is correctly fixed and stable after
performing the installation.
Let a minimum safety distance of 1 m between each side of the heater and
any obstacle (walls for example).