To Set The Timer - Panasonic CS-S9NKZW Manual Del Usuario

REMOTE CONTROL
Press and hold for 5 seconds to dim or restore the
10
unit's indicator brightness.
Press and hold for approximately 10 seconds to
11
show temperature setting in °C or °F.
12 Press to restore the remote control's default setting.
13 Not used in normal operations.
TIMER
ON
10
11
OFF
13
SET CHECK CLOCK
POWERFUL/
NANOE-G
QUIET
,
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
8
SET
1 2 3
CANCEL
AC RC
RESET
AUTO
ECONAVI
COMFORT
, ,

TO SET THE TIMER

TO SET THE TIMER
• 2 sets of ON and OFF timers are available to turn ON
or OFF the unit at different preset time.
• Complete below procedures to set each timer:
ON
1
OFF
Select ON or OFF timer
• Example of application at living room:
Morning: ON
OFF
Evening: ON
OFF
• To cancel ON or OFF timer, press
select respective
12
• If timer is cancelled manually or due to power failure,
you can restore the timer again by pressing
to select respective
OFF
• Upcoming timer will be displayed and will be activated
in sequence.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
NOTES NOTES
POWERFUL/ AUTO
QUIET COMFORT
,
• Cannot be selected at the same time.
Cancel
2
Cancel
Set the
time
at 07:00 (Wake up)
at 08:00 (Out for work)
at 17:00 (Back home)
at 22:00 (Sleep)
ON
or
OFF
or then press .
CANCEL
or then press
ECONAVI
,
TIMER
SET
Confi rm
to
ON
or
SET
.