Silk’n Perfect Touch TB-1458 Manual De Usuario página 12

EN Checking the trimmer
− Make sure that the precision
head is not resting on the
housing when you insert the
battery.
1. Take the protective cover
precision head
2. Turn the battery compartment cover
3
clockwise up to the stop point (see
Fig. C).
3. Take the battery compartment cover off.
4. Insert a 1.5 V LR03 (AAA) battery in the
battery compartment
In the process, observe the polarity indi-
cated in the battery compartment.
5. Put the battery compartment cover back
on the trimmer.
6. Turn the battery compartment cover
anticlockwise up to the stop point.
12
• When opening and closing
the battery compartment,
pay attention to the marks
on the trimmer housing.
• The battery compartment
cover and the protective
cover are each marked
with a dot. The two dots
are located above one
another when closed (see
Fig. B).
7
off.
8
and the
4
.