Portable Air Conditioner; How To Use - Taurus Alpatec COLD DESIGN Manual De Instrucciones

English

PORTABLE AIR CONDITIONER

COLD DESIGN
COLD DESIGN +
TEMP DESIGN
TEMP DESIGN +
Please do not install or use your mobile
air conditioner before you have carefully read this
manual. Please keep this instructions manual for
an eventual product warranty and for future
reference.
DESCRIPTION
A On / Off
B Temperature / Time +
C Temperature / Time –
D Cooling mode / dehumidifier / fan / heat *
E Speed
F Timer
G Display
H Double display light
I Sleep mode
(*) Only available in Temp Design and Temp
Design + models
1 Top cover
2 Control panel
3 Air outlet louver
4 Front housing
5 Base plate
6 Casters
7 Rear housing
8 Decorative box
9 Eva filter
10 Continous drainage hole
11 Air vent
12 Wrapping post
13 Con filter
14 Drainage hole
15 Exhaust pipe assembly
16 Window sealing plate assembly
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
USE AND CARE:
- Before each use, completely unplug the power
cable from the power supply.
- Use the handles to take or transport the appli-
ance.
- Unplug the power supply from the mains when
not in use and before performing any cleaning
operations.
- Keep this appliance out of the reach of children
and / or persons with reduced physical, senso-
ry or mental abilities or who are unfamiliar with
its use.
- Do not expose the appliance to extreme tem-
peratures. Keep the device in a dry, dust-free
place protected from direct sunlight. Never lea-
ve the appliance unattended. It will also save
energy and prolong the life of the device.
INSTALLATION
- Respect the legal provisions regarding safety
distances with other elements such as pipes,
electric conductors, etc.
- Make sure the appliance is level with the floor
- Do not cover or obstruct any openings in the
appliance.
- The plug must be easily accessible in order to
disconnect it in case of emergency.
MOUNTING THE EXHAUST PIPE:
- Stretch the tube, and screw its end to the air
outlet connector. Follow figures 1,2,3,4,5,6.
- The length of the air outlet pipe conforms to
the technical characteristics of the appliance.
Do not use air outlet tubes of different sizes or
materials, as they may cause faults.

HOW TO USE

USE:
- Unwind the cable completely before plugging
in.
- Plug the appliance into the mains.
- Orient the appliance to direct the air flow to the
desired direction.
- Switch the appliance on by pressing the On /
Off button (A).
- Select the desired mode (D).
- Select desired speed (E).