Atlas Filtri HYDRA Serie Instrucciones De Instalación Y Mantenimiento

INSTALLATION AND MAINTENANCE
OF HYDRA SELF-CLEANING FILTERS
Dear Customer,
Thank you for choosing this product manufactured in Italy by ATLAS FILTRI S.r.l.,
assembled and marketed in the USA and Canada by ATLAS FILTRI NORTH AMERICA,
LLC. The filter has been designed and manufactured in Italy using over 40 years of
expertise in the industry.
Copyright: This manual of instructions cannot be reproduced, in whole or in part, in any form (including
its recording, digitalization or photocopying) without the written consent of Atlas Filtri North America,
LLC.
1 Safety Alert Symbols
2 General Information
3 Personnel's Qualification
4 Precautions, Warnings
5 Installation
6 Start Up
7 Use
8 Spare Parts
9 Maintenance
10 Troubleshooting
11 Filter and Cartridge Disposition
12 LIMITED WARRANTY
Contact:
ATLAS FILTRI North America LLC
1068 North Farms Road Bldg. #3 - Wallingford, CT 06492, USA
Phone +1(203)284-0080 - Fax +1(203)294-9226
e-mail: atlasfiltrinorthamerica@atlasfiltri.com
A Company of the Atlas Filtri Group.
www.atlasfiltri.com
INSTRUCTIONS FOR
CONFORMITY CERTIFICATES
ATLAS FILTRI FILTER HOUSINGS COMPLY WITH THE
FOLLOWING INTERNATIONALLY ACCEPTED STANDARDS:
HYDRA self-cleaning filter series with plastic threaded
connections, as components certified by IAPMO RT to
NSF/ANSI 42, 61, 372 - lead free, CSA B483.1. In compliance
with Drinking Water Treatment Units regulations, USA and
CANADA.
TABLE OF CONTENTS
USA & CANADA
2
2
2
2
3
4
4
5
5
7
7
7
Atlas Filtri S.r.l.
Headquarter and
production in Italy
1