Safety Alert Symbols; General Information; Personnel's Qualification; Precautions, Warnings - Atlas Filtri HYDRA Serie Instrucciones De Instalación Y Mantenimiento

1 - Safety Alert Symbols

2 - General Information

PLEASE READ THIS INSTRUCTION MANUAL THOROUGHLY AND CAREFULLY AND
UNDERSTAND ITS CONTENTS BEFORE INSTALLING YOUR ATLAS FILTRI FILTER
HOUSING.
- The information in this instruction manual is subject to modifications without prior
notice and is not binding on the manufacturer Atlas Filtri North America, LLC.
- Keep the instruction manual for future reference.
Contact:
Product Identification:
The label must not be removed, tampered, hidden, covered, or changed.
If the label on the product is missing or the operational conditions on the label are not
legible, DO NOT INSTALL the filter and contact Atlas Filtri North America LLC
Authorized Distributors
atlasfiltrinorthamerica@atlasfiltri.com.
The values of the maximum working temperature and the maximum working
pressure shown in the label affixed to the filter housing are intended as maximum
working parameters and must not be exceeded under any circumstance.

3 - Personnel's Qualification

ONLY QUALIFIED AND LICENSED PERSONNEL MAY PERFORM INSTALLATION,
SERVICE AND MAINTENANCE OF THE ATLAS FILTRI FILTERS.

4 - Precautions, Warnings

READ ALL INSTRUCTIONS AND PRECAUTIONS BEFORE INSTALLING AND USING
YOUR ATLAS FILTRI PRODUCT.
Before installation ensure that any electric plugs in the vicinity of
the area are disconnected.
Do not install near electric appliances.
Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
Systems certified for cyst reduction may be used on waters that
contain filterable cysts.
WARNING SIGN: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury. It highlights conditions that are a serious
risk for personal safety.
CAUTION SIGN: Indicates a potentially hazardous
situation which, if not avoided, may result in a minor or
moderate injury, and to alert against unsafe practices.
NOTICE SIGN: Alerts you to pertinent facts and
conditions.
See page 1
A label carrying product identification, serial number,
production batch is applied on the package of the
product. An additional label describing maximum
working pressure and maximum working temperature
is applied to the filter housing.
or contact the manufacturer by e-mail at
2