Environmental Instructions; Unpacking - FRICON CLS Uso Y Mantenimiento

SMR
Fig. 4 - Location of Characteristics
Label
Climate
classification*
ISO 23953-
2
3
4

3. Environmental Instructions

The WEEE symbol on the product or on the packaging indicates that this product may
not be processed as household waste.
To discard the appliance, take it to a local recycling center. It must be delivered to the
selective collection center for recycling electrical and electronic equipment. Ensuring
this product's appropriate disposal will help prevent eventual negative consequences
to the environment and public health, which may be brought on by improper treatment
of the product. During the correct disposal of the equipment, make it unusable,
disconnect it from the power supply and cut the power cable. Dispose of the refrigerant
and polyurethane foam insulation material in a safe and environmentally friendly
manner.
For more detailed information on recycling this product, contact your local
municipal services, the selective collection center in your residential area, or the
establishment where you acquired the product.

4. Unpacking

NOTES:
• To protect the preservation equipment from damages, it must be transported in
its position of operation. Failure to comply with this rule results in loss of
warranty.
• Before and during unpacking the appliance must be visually inspected for
eventual transportation-caused damages. Pay attention to loose parts, bulges,
hazards, visible fluid losses, among others. Eventual damages should be
ºC %Hr
25 60
30 55
Technical information on characteristics
label:
• Serial Number
• Designation and type of equipment
• Nominal current and electric power
• Nominal voltage and frequency
• Consumption
• Gross and net volume
• Climate classification*
• Refrigerant and quantity used
• Electrical diagram
• Other technical information.
Classification
NSF 7
Type I
39
English
ºC %Hr
24 55