FRICON CLS Uso Y Mantenimiento página 54

SMR
Parameters to change:
Parameters
to change
t01
t11
d02
d03
d06
Dixell XWi70K/XR75CH Controller
Tecla
Go into parameters:
• Press the SET + ↓ button (3 sec.) release and
press SET + ↓ again (7 sec.).
• Navigate the parameters with ↑ and ↓.
• Navigate the parameters with SET.
• To exit press SET +↑ for 15 seconds.
Set clock:
• Enter the parameters as indicated.
Meaning
Hour for first defrost
Minute for first defrost
Temperature to stop defrosting
Defrost interval, when defrost time is off
Time with the compressor off to allow water to drain
Fig. 15 - Dixell XWi70K Controller
Função
To switch the equipment on and off (when onF = oFF).
To turn the light on and off
(when oAx = LiG (ON)).
To lock and unlock the keyboard.
To go into programming mode.
54
English
Action
Validate by
pressing the
SET key