NEC NP2000 Manual Del Usuario página 111

5. Set the Active option.
• Use the SELECT
A check mark will be placed in [Active].
6. Complete the settings.
• Use the SELECT
On- time or off-time will be set.
You will be returned to the Program Timer screen.
Activating the Program Timer
On the Program Timer screen, select [On].
This will activate the time settings.
Selecting [Off] will disable the Program Timer even when a check mark is placed in the [Active] check box of the Edit
screen.
NOTE:
• The Program Timer is executed on a set time basis, not on a program basis.
When one or more active on- and off-time are set, the earlier time setting will take preference.
• The off-timer programs not marked with a check in the [Repeat] check box will be disabled and the check mark in the [Active]
check box will be cleared.
The on-timer programs not marked with a check in the [Repeat] check box will be disabled and the check mark in the [Active]
check box will be cleared.
• When on-time and off-time are set for the same time, the off-time setting will take preference.
• The on-time setting will not be executed while the cooling fans are running or an error is occurring.
• If the off-time setting is expired in condition in which the power off is not possible, the off-timer setting will be executed in
condition in which the power off is possible.
• Programs with [On] selected on the [Edit] screen will not be executed even if the Program Timer is enabled.
Changing the programmed settings
1. On the Program Timer screen, use the SELECT
press the ENTER button.
• The [Command] screen will be displayed.
2. Select the [Edit] button and press the ENTER button.
The [Edit] screen will be displayed.
3. Change the settings.
4. Use the SELECT
The programmed settings will be changed.
You will be returned to the Program Timer screen.
or button to select [Active] and press the ENTER button.
or button to select the [OK] button and press the ENTER button.
or button to select the [OK] button and press the ENTER button.
or button to select a program you want to edit and
101
6. Using On-Screen Menu