NEC NP2000 Manual Del Usuario página 84

[Brightness]
Adjusts the brightness level or the back raster intensity.
[Contrast]
Adjusts the intensity of the image according to the incoming signal.
You have two options: Manual and Auto.
NOTE: The Auto Contrast function will not work when the menu or a message is displayed
[Sharpness]
Controls the detail of the image for Video (not valid for RGB and digital signals).
[Color]
Increases or decreases the color saturation level (not valid for RGB and digital signals).
[Hue]
Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for
Video, Component and TV standard inputs (not valid for RGB and digital signals).
Input signal
Computer (RGB analog)
Computer (RGB digital)
Component
Video, S-Video
Viewer, LAN
Yes=Adjustable, No=Not adjustable
[Reset]
The settings and adjustments for [Picture] will be returned to the factory settings with the exception of the following;
Preset numbers and [Reference] within the [Detail Settings] screen when [Standard] is selected in [Mode].
The settings and adjustments under [Detail Settings] within the [Preset] screen that are not currently selected will not
be reset.
Brightness Contrast
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
74
6. Using On-Screen Menu
Sharpness Color
No No
No No
Yes Yes
Yes Yes
No No
Hue
No
No
Yes
Yes
No