[Entry List] - NEC NP2000 Manual Del Usuario

[Entry List]

Use the SELECT
ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen.
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT
press the ENTER button on the remote control or the projector cabinet to display the [Entry Edit Com-
mand] screen.
3. Use the SELECT
Using the [Entry List]
Making any adjustments to the current picture will automatically register its adjustments to the [Entry List]. The regis-
tered signal can be loaded any time from the [Entry List].
NOTE: Up to 100 presets can be registered except settings on the Picture.
buttons on your remote control or the projector cabinet to select the signal and press the
or button on your remote control or the projector cabinet to select any number and
or button to select [Store] and press the ENTER button.
70
6. Using On-Screen Menu