Care and Maintenance
CLEANING THE INDUCTIVE PICKUP CLIP
Dirt or grease on the inside surfaces of the induc-
Fig. 6. Cleaning the Inductive
tive pickup clip can result in erratic flashing or poor
Pickup Clip
operation of the timing light. Periodically clean the
contact surfaces inside the inductive pickup clip by
wiping with a soft cloth. See Figure 6.
REPLACING THE INDUCTIVE
PICKUP LEADS
The timing light is equipped with detachable leads
which can be disconnected from the timing light
CLEAN
for easy storage after use. If the test leads or clips
become damaged, a replacement set can be
CONTACT
obtained from your dealer or directly from the
SURFACES
service center.
11