remove Controller batteries
aboard aircraft
Before boarding any aircraft or packing
the wireless controller in luggage that
will be checked, remove any batteries
from the wireless controller. The
wireless controller can transmit radio
frequency (RF) energy, much like a
cellular telephone, whenever batteries
are installed.
turn Your Console and Controller on
To turn your console and controller on,
press and hold the Xbox Guide button on
your controller. To turn on just your
console, touch the console power button
lightly.
Connect additional Controllers
To connect additional wireless controllers
to your console, or to connect your
controller to a different console, follow
the steps below.
8
To connect a wireless controller to your
console:
Press and hold down the Xbox Guide
1
button until the controller turns on.
Make sure the console is turned on. If
2
not, touch the console power button
and allow the console to completely
start up. When the Xbox Dashboard or
inserted disc runs, the console is ready.
Press the connect button on the
3
console and wait for the console lights
to spin.
Press the connect button on the
4
controller and wait for the controller
lights to spin.
After the lights on the controller and
console spin and flash once, the controller
is connected.
Playing Games with Your Controller
For information about how to use the
controller with games, see your game
instructions. When playing, your
controller's position is indicated by one of
four lights around the Xbox Guide button,
and you can press the Xbox Guide button
to show the Xbox Guide at any time.