K Tool International KTI63500 El Manual Del Propietario página 4

hydraulic jack oil, a light turbine oil, Chevron AW ISO 32 or Unocal Unax AW 150.
4. Every jack owner is responsible for keeping the jack labels clean and readable. Use a mild soap solution to wash external
surfaces of the jack but not any moving hydraulic components. Contact K-Tool International for a replacement label if your jack's
label is unreadable.
5. Inspect the jack before each use. Do not use the jack if any component is cracked, broken, bent, shows sign of damage or leaks
hydraulic fluid. Do not use the jack if it has loose or missing hardware or components, or is modified in any way. Take corrective
action before using the jack again.
6. Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this
equipment. Repairs must be performed by an authorized service center.
TROUBLESHOOTING
PROBLEM: UNIT WILL NOT LIFT RATED LOAD.
ACTION: Purge air from hydraulic system by following procedure under SETUP
PROBLEM: UNIT WILL NOT SUSTAIN RATED LOAD OR FEELS "SPONGY" UNDER RATED LOAD.
ACTION: Purge air from hydraulic system as above.
PROBLEM: UNIT WILL NOT LIFT TO FULL HEIGHT.
ACTION: Purge air from hydraulic system as above.
PROBLEM: UNIT STILL DOES NOT OPERATE.
ACTION: Contact your place of purchase for details on handling warranty.
WARRANTY HANDLING PROCEDURES & GUIDELINES KTI STANDARD DUTY SERIES
K-Tool International 1 Year Limited Warranty
K-Tool International Lifting Equipment is warranted to be free from defects in material and workmanship within one year from the date of
original purchase. This warranty is extended to the original retail purchaser only. If any jack or service-related item proves to be
defective during this period, it will be replaced or repaired, at K-Tool International's option, without charge. This warranty does not apply
to damage from accident, overload, misuse or abuse, nor does it apply to any equipment which has been altered or used with special
attachments other than those recommended. This warranty does not cover repairs made by anyone who is not a K-Tool International
Professional Lifting Equipment Authorized Repair Center.
All Standard Duty jacks or service-related equipment will be replaced or repaired at K-Tool International's option during the 1 year warranty
period. During the 1 year warranty period, all alleged defective products and/or parts must be shipped, freight prepaid, along with proof
of date-of-purchase, to your nearest K-Tool International Professional Lifting Equipment Authorized Warranty Center. Be certain to
include your name, address and phone number along with proof-of-purchase information, and a brief description of the alleged defect.
The product will be returned to the customer, freight prepaid.
Many alleged defectives may simply be handled by calling your nearest Service Center for parts. See pages 16-18 for a listing of
authorized warranty service centers.
In no event shall K-Tool International be liable for incidental or consequential damages. The liability on any claim for loss or damage
arising out of the sale, resale or use of a jack or related service equipment, shall in no event exceed the purchase price. SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU.
THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED IN CONNECTION WITH THE SALE OF K-TOOL
INTERNATIONAL PROFESSIONAL LIFTING EQUIPMENT. ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
KTI63500 4 07/14/14