RIB K Manual Del Usuario página 25

SPARK
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into contact
with the external copper sheath, since this would prevent the antenna from
working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 433
code ACG7059
code ACG7042
code ACG5452
APP8054 APP+ card
to manage the control panel using
Bluetooth 4.2 transmission
APP8064 Wi-Fi module for APP+
card
to manage the control panel using
the local Wi-Fi network (WLAN)
TOUCH
MECHANICAL STRIP L = 2 m - CERTIFIED EN 13849-2 (2008) CATEGORY 3
25
code ACG3015
APP8060 Clock module for APP+
card
to add access control features to
the control panel
APP8066 RJ45 module for APP+
card
to manage the control panel using
the local network (LAN)
G
B