LOADING THE BATTERY
This camera uses one 3-volt lithium
KODAK K123LA (or equivalent) Battery
that supplies power for all camera
operations.
1. Open the
BATTERY
(11) by using
DOOR
your finger tip.
• Before you remove
the old battery, close
the
LENS COVER
(3).
FLASH
• To remove the
battery, pull on the strap.
2. Place the battery
over the battery-pull
strap and insert the
battery into the
battery chamber.
3. Snap the battery
door closed.
• After you load a
new battery into the
camera, reset the
date and time as
prompted on the LCD panel.
/
Low-battery indicator
It's time to replace the battery when —
• the
BATTERY SYMBOL
the "BATTERY LOW" message
appears on the LCD panel or
• none of the indicators, except for
steady battery symbol, appear on the
LCD panel and the shutter button
cannot be released.
EXP
LEFT
(26) "blinks" and
9