Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART AX-ADGM03
GM Class 2 vehicles 2000-up
The AX-ADGM03 is designed to and MUST be used with the AX-ADBOX1 or AX-ADBOX2 (sold seperately).
Please refer to AX-ADBOX1 or AX-ADBOX2 for 16-pin connector instructions.
BUICK
Allure
2005-2009
Century
2004-2005
LaCrosse
2005-2009
Rainier
2004-2007
Regal
2004
Rendezvous
2002-2007
Terraza
2005-2008
CADILLAC
Escalade
2003-2006*
Escalade EXT
2003-2006*
CHEVROLET
Avalanche
2003-2006*
Cavalier
2000-2005
Colorado
2004-2012
Corvette
2005-2013
Express
2003-2007
Impala
2000-2005
Kodiak
C4500-C8500
2003-2009
Malibu
2001-2003
METRA. The World's best kits.
AX-ADGM03
APPLICATIONS
CHEVROLET
(continued)
Malibu Classic
2004-2005
Monte Carlo
2000-2005
Silverado
2003-2006*
Silverado Classic
2007*
SSR
2003-2006
Suburban
2003-2006*
Tahoe
2003-2006*
Trailblazer
2002-2009
Uplander
2005-2008
GMC
Envoy
2002-2009
Canyon
2004-2012
Savanna
2003-2007
Sierra
2003-2006*
Sierra Classic
2007*
TopKick
C4500-C8500
2003-2009
Yukon/XL/Denali
2003-2006*
HUMMER
H2
2003-2007
1-800-221-0932
HUMMER
(continued)
H3/H3t
2006-2010
ISUzU
Ascender
2003-2008
H-Series
2003-2008
I-Series
2006-2008
OLDSMOBILE
Alero
2001-2004
Bravada
2002-2004
Intrigue
2002
PONTIAC
Aztec
2001-2005
Grand Am
2001-2005
Grand Prix
2004-2008
Montana SV6
2005-2006
Sunfire
2000-2005
SAAB
9-7x
2005-2009
SATURN
Relay
2005-2007
metraonline.com
INTERFACE COMPONENTS
• 22-pin to 24-pin and 12-pin GM harness
• 4-pin to 4-pin resistor pad harness
TOOLS REQUIRED
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
* These vehicles have a digital amp option. Please refer
to the RPO list located in the glove box and if code Y91
appears you have a digital amplifier.
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra AX-ADGM03

  • Página 1 • 22-pin to 24-pin and 12-pin GM harness • 4-pin to 4-pin resistor pad harness The AX-ADGM03 is designed to and MUST be used with the AX-ADBOX1 or AX-ADBOX2 (sold seperately). Please refer to AX-ADBOX1 or AX-ADBOX2 for 16-pin connector instructions.
  • Página 2: Installing The Interface

    24-, 22-, and 12-pin aftermarket radio. speaker output. do not have a digital amplifier harnesses into the AX-ADGM03. • Connect the Green wire to the • Connect the Purple wire to the radio’s 2. Plug the 24- and 12 pin GM harness...
  • Página 3 30-seconds, then back off, then back on having audio playing. again to test the radio. 2. Turn your aftermarket radio’s volume up Testing the AX-ADGM03 3/4 of the way. • Turn the ignition on, and then turn the 3. With a small screwdriver adjust the aftermarket radio on.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART AX-ADGM03 Additional 12-pin harness (ASWC-1 harness) This 12-pin harness is to be used in conjunction with the ASWC-1 (not included). Please refer to ASWC-1 instructions for programming. BUICK CHEVROLET ISUzU For the following vehicles please cut the White/...
  • Página 5: Vehículos Gm 2000 Y Más Recientes Clase

    • Arnés de cojinete de resistencia de 4 pins a 4 pins El AX-ADGM03 está diseñado y DEBE utilizarse con el AX-ADBOX1 o AX-ADBOX2 (se vende por separado). Consulte el AX-ADBOX1 o AX-ADBOX2 para obtener instrucciones para el conector de 16 pins.
  • Página 6: Instalación De La Interfaz

    4 pins. Si el vehículo no está mercado secundario salida de la bocina negativa izquierda amplificado, conecte juntos los dos Instalación de AX-ADGM03 • Conecte el cable violeta/negro al de atrás del radio. arneses de 4 pins para el conector de 1.
  • Página 7 Instalación de la interfaz 3. Cuando el volumen esté en el nivel deseado, La pantalla XIA-LCD (opcional) pins al AX-ADGM03. retire las llaves de la ignición. Esto bloqueará el 2. Conecte el arnés GM de 24 y 12 pins en el arnés La pantalla XIA-LCD le permitirá...
  • Página 8: Arnés De 12 Pins Adicional

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA AX-ADGM03 Arnés de 12 pins adicional (arnés ASWC-1) Este arnés de 12 pins se debe usar junto con el ASWC-1 (no incluido). Consulte las instrucciones de ASWC-1 para la programación. BUICK CHEVROLET ISUzU En los siguientes vehículos corte los cables...