Cequent Performance Products 65065 Instrucciones De Instalación página 5

5. Install remaining M12 bolt (5) through tow hook and bracket. Both
sides. Do not completely tighten.
7. Tighten all M12 CL10.9 fasteners with torque wrench to 86 Lb.-Ft. (115 N*M), tighten 7/16-14
GR5 carriage bolts to 50Lb.-Ft.(68 N*M), and ½-13 carriage bolt to 75 Lb.-Ft.(102 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2015 Cequent™ Performance Products, Inc. -
Printed in Mexico
6. Raise center-section of hitch into position and install fasteners as shown
using the carriage bolt(6), lock washer(7), and hex nut(8). Both sides.
8. Reinstall air dam if trimmed. See
Figure 4. Obtain owners permission.
Sheet 5 of 15 65065NP
Air dam – trim
19-1/2" (495.5 mm)
from center in both
directions.
7-27-15 Rev. B