Installation Steps; Care And Cleaning - MacNeil WeatherTech Easy-On Instrucciones De Instalación

Installation Steps

Align hood deflector with the raised area on the center
of hood. Press firmly to adhere exposed tape.
hood shield
tape
3
Fender protector Installation
5

Care and Cleaning

•
Wash only with mild soap & dry with a clean cloth.
© 2011 by MacNeil IP LLC
NOTE: Actual application may vary slightly from illustrations.
Repeat Steps 1 - 4 for both fender protectors. Position bump-ons as
6cm
2.5"
9.5"
24cm
With hood shield in its final position, remove re-
mainder of tape by pulling on free ends.
4
indicated to prevent vibration.
bump-on
Page 2 of 2