Device Layout; Cleaning And Maintenance - HQ-Power PROMIX60 Manual Del Usuario

4. Device Layout

a. Top Panel
1. PH1/LN1 - LN2 selector
2. Channel 1 gain control
3. Channel 1 High frequency control
4. Channel 1 Low frequency control
5. Microphone volume control
6. Channel 1 fader
7. Channel 1 / 2 crossfader
8. PH3/LN3 - LN4 selector
9. Channel 2 gain control
10. Channel 2 High frequency control
11. Channel 2 Low frequency control
12. Headphones volume control (CUE)
13. Channel 1 / 2 cue selector
14. Channel 2 fader
15. Talkover on/off switch
16. 6.35mm microphone input on the front panel
17. 6.35mm headphones output on the front panel
18. Master level stereo VU LED meter
b. Rear Panel
19. Power Switch
20. Power Cord Connection
21. REC stereo RCA output
22. AMP stereo RCA output
23. LINE4 stereo RCA input
24. PHONO3/LINE3 selector
25. PHONO1/LINE1 selector
26. PHONO2/LINE3 stereo RCA input
27. LINE2 stereo RCA input
28. PHONO1/LINE1 stereo RCA input
5. Connections
• Make sure the power switch (#19) is set to "OFF" before making any connections.
• Use only high quality audio cables to minimize sound quality losses.
• Connect your amplifier to the AMP output (#22) and any recording device to the REC output (#21)
• Connect your microphone to the MIC input (#16) and your headphones to the CUE output (#17).
• Connect your record players to the PHONO inputs (#26 & 28) and set the selectors (#24 or 25) to PH.
• Connect any line signals to the LINE (LN) inputs (#23 & 27 are line inputs only ; for inputs #26 & 28 you need to
set the switches 24 and 25 to the LN side).

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts and the installation location should not be deformed, modified or tampered with.
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts.
7. Contact your dealer for spare parts if necessary.
PROMIX60 2 VELLEMAN