Installing Flat Panel Screen To Wall Plate - PEERLESS SmartMount SF670 Manual Del Usuario

Mounting and Removing Flat Panel Screen
WARNING
• Always use an assistant or mechanical lifting
equipment to safely lift and position the flat panel
screen.
Hook adapter brackets (BB) onto wall plate (AA).
3
Then slowly swing screen in as shown. Turn safety/
security screws, using security allen wrench (EE),
clockwise at least six times to prevent screen from
being removed as shown in detail 1 of figure 3.1.
Screen can be adjusted horizontally if desired as
shown in figure 3.2.
NOTE: To lock the screen down, tighten safety/
security screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety/security
screws, swing screen away from mount, and lift
screen off of mount.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
AA
SAFETY/
SECURITY
SCREWS
BB
DETAIL 1
8 of 24 ISSUED: 11-09-07 SHEET #: 202-9253-2 10-13-08
BB
AA
fig. 3.1
fig. 3.2