Noise Data; Vibration Information - Worx WX255 Manual Original

please refer the nameplate of the tool supplied by WORX.
*Voltage measured without workload. Initial battery voltage reaches maximum of 4 volts. Nominal voltage is 3.6 volts.

NOISE DATA

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
10
Typical weighted vibration
The declared vibration total value may be used for comparing one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from the declared value
depending on the ways in which the tool is used dependant on the following examples and other variations on
how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
Vibration emission value: a
Uncertainty K = 1.5m/s²
L
L
= 0.70m/s²
h
: 65dB(A)
pA
: 76dB(A)
wA
3.0dB(A)