Festo DGEA Serie Instrucciones De Utilizacion página 45

DGEA-...
10 Dismantling
Warning
Loads which suddenly slide down from the cantilever arm may cause injury to
people in the vicinity of the DGEA-... .
1. Place the cantilever arm in a stable position.
The brake must be supplied with power for this purpose.
2. Remove the following attachments:
– loads and adapter elements on the caantilever arm
– the motor on the drive head
– extensions on the second shaft pin.
3. Interrupt the power supply.
4. Then loosen the fastening screws on the drive head.
11 Repairs
Overhauling the DGEA-...:
Return the DGEA-... to our repair service for overhaul.
S
The repair procedure requires very fine adjustments.
Festo DGEA-... 0106NH English
45