General Technical Specifications - Festo DGEA Serie Instrucciones De Utilizacion

DGEA-...
14

General technical specifications

Type
Operating mode
Mounting position
Drive type
Toothed belt division
Feed constant
End position protection
Repetition accuracy
Max. permitted speed
Tightening torques of the cover screws
Maximum permitted loading of the roller
guide
– Fy max, Fz max
– Mx max
– My max
– Mz max
Max. permitted input loading
– Drive torque on shaft pin
– Feed force of toothed belt
Condition for combined loadings
Festo DGEA-... 0106NH English
DGEA-18-... DGEA-25-...
Cantilever operation (yoke mode)
As desired
Stepping motor, servomotor
(incl. gears and, if applicable, brake)
3 mm 3 mm
81 mm/rev 81 mm/rev
Integrated buffers for very low cushioning energy
± 0.05 mm
3 m/s 3 m/s
5.3 Nm 5.3 Nm
1200 N 1900 N
12 Nm 18 Nm
59 Nm 150 Nm
40 Nm 105 Nm
3 Nm 5.2 Nm
230 N 400 N
   
M M
X Y
+ +
    
M M M
X_max Y_max
DGEA-40-...
5 mm
120 mm/rev
3 m/s
9 Nm
4500 N
83 Nm
420 Nm
290 Nm
19 Nm
1000 N
     
M F F
Z Y Z
≤ 1
+ +
    
F F
Z_max Y_max Z_max
49