Project Source F51B0061CP Manual Del Usuario página 5

ASSEMBLY INSTRUCTIONS
4. Determine which type of connection you will be
making. (1) Ball nose risers (3/8" O.D. copper
tubing) with coupling nuts (not included) or (2)
1/2" I.P.S faucet connectors. Attach water supply
lines (not included) to the faucet (A).
5. Install drain body (DD) and rubber washer (AA)
through top of sink (not included). Secure with
large rubber washer (BB) and lock nut (CC).
Note: Opening for ball rod (HH) must face
towards rear of sink.
6. Insert plunger (EE).
Note: Plastic loop on plunger (EE) facing rear
of sink is in locked mode and plunger cannot
be removed. Plastic loop on plunger (EE)
facing the front of sink is in unlocked mode
and can be removed for easy cleaning.
4
5
AA
DD
BB
No Yes
CC
6
5
A
1 2
1
2
3
EE
EE