Cleaning And Maintenance - Mobicool C40AC Instrucciones De Uso

C40 AC
➤ Place the coolbox on a firm base.
➤ Connect the coolbox to a 220-240 Vw socket using the connection cable.
➤ Open the lid of the control panel (fig. 2 1, page 3) by pressing down on it.
NOTE
I
Press down on the lid again to close it.
➤ Turn the temperature regulator (fig. 2 2, page 3) clockwise to the
desired position.
NOTE
I
The further you turn the regulator towards "MAX", the lower the
refrigerating temperature.
✓ The coolbox starts cooling the interior.
Switching off the coolbox
➤ When you stop using the coolbox, turn the temperature regulator
(fig. 2 2, page 3) anticlockwise to "0" and pull the connection cable from
the socket.
NOTE
I
You can wind the cable around the two holders on the back of the
device for storage.
7

Cleaning and maintenance

WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
EN
Cleaning and maintenance
9