Publicidad
Step 14
Apply the WARNING LABEL (5L) to the upper DRAWER BOTTOM (B12). You should be able to read the label when the drawer
å
is open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into
å
the top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. To clean your unit, dampen a cloth with tap water and wipe.
å
And to celebrate, why not share your success story?
5L
30 lbs. each
Page 18
35 lbs.
B12
20 lbs.
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
1G
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
417070
2S
1S
WARNING
www.sauder.com/services
Publicidad
