Philips HQ8445 Manual De Instrucciones página 9

Troubleshooting
1
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see chapter 'Cleaning and
maintenance').
Cause 2: long hairs are obstructing the shaving
B
heads.
Clean the cutters and guards.
C
Remove the retaining frame. Do not clean
more than one cutter and guard at a time,
2
since they are all matching sets. If you
1
accidentally mix up the cutters and guards, it
may take several weeks before optimal shaving
performance is restored.
Remove the hairs with the brush supplied.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
B
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones
Replace damaged or worn shaving heads with
HQ8 Philishave Sensotec shaving heads only.
Reduced shaving performance
ENGLISH
11