Sauder 420196 Instrucciones De Montaje página 22

Step 18
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D14 and D15).
å
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT SIDE (D14)
å
and a DRAWER LEFT (35GD) to the DRAWER LEFT SIDE (D15). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Repeat this step for the other drawer.
å
2
3
Page 22
Roller end
1
D15
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
10A
D14
3S
420196
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
1
2
3
www.sauder.com/services