Steam Function; Steaming With The Clothes Brush - Silvercrest SDMF 1300 A1 Instrucciones De Uso E Indicaciones De Seguridad

Steam function

WARNING – RISK OF INJURY!
► Never attempt to steam pieces of clothing while they are being worn.
1) Plug the mains cable
pressing the On/Off switch
warm-up phase. As soon as the blue LED
appliance will start producing steam.
2) Hold the appliance by the handle
on the steam head
3) Press the steam button
steam head
NOTE
► For the continuous steam output, you can also lock the steam button
6
► You can use the steam function with or without the clothes brush
4) Release the steam button
5
head

Steaming with the clothes brush

1) Before switching on the appliance, place the clothes brush
5
head
5
head
clicks into place.
C
2) Switch the appliance on.
3) Hang the item to be ironed on a coat hanger and pull it taut with one hand.
Steam the garment evenly from top to bottom.
4) Slowly brush the section of the fabric from top to bottom. Do not apply a lot of
pressure. The combination of steam and the clothes brush
all wrinkles.
■ 10 │ GB │ IE
q
into the power socket and turn on the power by
3
5
away from your body.
6
and start at the top of the garment. Move the
5
slowly downwards.
by sliding it downwards.
6
. The appliance will need to heat up again.
, making sure that the large wing is on the underside of the steam
(fig. C). Push the clothes brush
1
. The blue LED
1
lights up permanently, the
w
. Make sure you aim the steam openings
as soon as water drips from the steam
4
onto the steam head
flashes during the
4
.
4
on the steam
5
until it
4
gently removes
SDMF 1300 A1