Tronic SLIM TPB 5000 A1 Instrucciones De Uso página 17

Batería externa
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 166
Connect the supplied charging cable 7 or the origi-
nal charging cable of the device you want to charge
to one of the three USB outputs (4, 5 or 6).
Then connect the device you want to charge to the
power bank 1. The charging process begins auto-
matically.
If charging does not start automatically, press the
ON/OFF button 2 once briefly to start the charging
process.
NOTE
The integrated Smart Fast Charge technology
enables reduced charging times for compatible de-
vices. Compatible connected devices automatically
receive a signal to draw the maximum available
charging current.
During the charging process, the charge level LEDs 3
show the current charge level of the power bank (see
table in the section Checking the charge level).
To stop charging, disconnect the charging cable from
the mobile device and the power bank. The charging
status LEDs 3 go out after about 35 seconds.
Optionally, you can press the ON/OFF button 2
twice in quick succession to turn off the power bank
and the battery level LEDs 3.
GB │ IE
14 
TPB 5000 A1

Publicidad

Tabla de contenido
loading

Tabla de contenido