Tabla de contenido
Publicidad
PROBLEM
Refuse container loses the refuses
The electric vibrator doesn't work
When the motor-sweeper is on a gradient the
motor stops suddenly
1) Cleaning:
When cleaning and washing the machine, take care when using aggressive detergents, acids, etc.
Follow the instructions provided by the detergent producer, and wear protective clothing if appropriate (e.g. overalls,
gloves, goggles, etc. - see EEC directives on this subject).
2) Explosive atmosphere:
The machine is not constructed to work in environments where there is a risk that there might be explosive gases, dusts or
vapours, and so its use in an explosive atmosphere is FORBIDDEN.
3) Disposal of harmful substances:
Comply with the laws in force on waste disposal and treatment when disposing of the material collected, the machine filters
and spend material such as batteries, motor oil, etc.
4) Scrapping the machine:
If the machine is scrapped, subdivide the types of materials of which it consists (EEC Directives) according to the disposal
method, so that they can be disposed of in accordance with the laws in force.
Consign hazardous materials such as batteries, spent oils, etc to operators authorized to dispose of these substances.
R 703 H SACK/1
MOTOSCOPE INDUSTRIALI
TROUBLESHOOTING
CAUSE
Container too full
Container closed incorrectly
Broken seal gaskets
Broken micro-switch
Excessive motor absorption, caused by:
- worn charcoals
- worn bearings
- burnt out winding or rotor
Low oil lever (OIL ALERT)
Safety information
CORRECTIVE ACTION
Empty more often
Close
Replace
Replace
Replace
Replace
Replace
Top up oil
75
Publicidad
Tabla de contenido
