Connection To Display - CAME PS BARCODE Serie Manual De Instalación Y Manteniemiento

16

Connection to Display

12 VAC transformer
For 230 VAC - 50-60 Hz mains power
Operating temperature
from -20 to +50°C
Cable*
NOT INCLUDED
recommended cable:
unshielded twisted multi-pair
(CAT 5 - U/UTP - AWG24)
N.B.: Pay attention to the order of the wires. The colour must correspond on both the display and the RBMP1 (A B GND).
PS BARCODE - Hardware and connections
Serial printer
NOT INCLUDED
Required specifi cations
Characters per 24
line
Serial RS232
Baud Rate 2400 bps
Characters 8 Bits
Parity None
Flow control XON / XOFF
Automatic new Enabled on CR
line
Cable*
recommended cable:
unshielded twisted
(CAT 5 - U/UTP - AWG24)
RBMP1
* AWG24 connection cable colours
√ White/Orange twisted pair on GND
√ White/Green twisted pair to be split:
• White on A
• Green on B
Insulate the remaining two pairs.
NOT INCLUDED
multi-pair