CAME PS BARCODE Serie Manual De Instalación Y Manteniemiento página 95

PS BARCODE -
PSCA2 + PSF2 control boards + PSBR1 (PSC7000/PSC7001) - description
1*
L N
8
1 - Terminals for 230 VAC control board * power supply
2 - Terminal for connection to internal light (already
connected)
3 - Terminal for the internal thermostat connection (already
connected)
4 - Terminal for the antifreeze heating element connection
7
6
5
1 - Connection to TSP00 sensors
2 - Connector for signal decoding card (R700)
3 - "Communication active" LED signal light
4 - Connector for barrier code reader
* The cross-section of the double insulated power cable (230 V) depends on the specifications and dimensions of the
system, and must not be less than 2.5 mm². Before connecting the device, disconnect the mains power supply to the system.
Hardware and connections
PSF2 - auxiliary components management
2 3 4
LAMPADA TERMOSTATO RESISTENZA
1 2 1 2 1 2
1 2 3 4
PSBR1 - ticket management
1 2
5 6
HELP CITOFONO
1 2 3 4 5 6 7
5 6 7 8 9 10
(already connected)
5 - Terminal for HELP pushbutton connection
6 - Terminal for the connection of a possible intercom.
7 - Terminal for connecting the automated pay station to
other stations or components in the car park
8 - Already connected
5 - Connector for the ticket dispenser
6 - Power supply present LED signal light
7 - Connector for connecting to PSCA2 (via PSF3)
7
A B GND
11 12 13 14
3
4
27