Installation - Klarstein Prism 10033285 Manual Del Usuario

EN
18

INSTALLATION

Preparation
• If you have an outlet to the outside, your cooker
hood can be connected as below picture by means
of an extraction duct (enamel, aluminium, flexible
pipe or inflammable material with an interior
diameter of 150 mm).
• Before installation, turn the unit off and unplug it
from the outlet.
• The cooker hood should be placed at a distance of
65-75 cm above the cooking plane for best effect.
Installation (Vent outside)
Note: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10
• Position the hanging plates on the ceiling, mark
the position of the holes before drilling. The
distance between the hanging plates should be
530 mm.
• Use three anchor bolts to assemble the hanging plates to the ceiling. Ask an
installer or a qualified technician to select the anchor bolts or screws.
-5
Bar).