Operation - Klarstein Prism 10033285 Manual Del Usuario

EN
22

OPERATION

Control panel
When the power is turned on, the unit automatically switches to standby mode.
Timer button
• Time setting: in standby mode, press the timer button to set the time. The
hour display flashes. Use the "+" or „–" button to set the time. Press the
Timer button to change the minute setting. Use the "+" or "–" button to set
the minutes. Press the Timer button again or wait 10 seconds to finish the
time setting.
• Timer setting: short press the timer button in working mode. The preset
cycle is: off 15 mins  30 mins  45 mins  60 mins  off.
Use the "+" or "–" key to select the desired timer time, except for the timer
setting "off".
• Quick timer: Press and hold the "+" and "–" button for 1 second, the
digital display flashes and starts a 5 minute countdown, after 5 minutes the
motor and light will turn off automatically and a buzzer sounds.
Speed plus button
For increasing the speed of the fan
Speed decrease button
For decreasing the speed of the fan.
Light button
• Short press for lamp power control.
• Long press:
1 To deactivate the "Cleaning symbol" and to reset the total working
time when the "Cleaning symbol" is activated and the motor or lamp is
switched on.
2 To check the current total working time when the "Cleaning symbol" is
deactivated.