Lenco DFT-1010 Manual Del Usuario página 5

This option is to set the country. When users select the country, the OSD
language will automatically change to its native language.
Language
After choosing Language and pressing OK or
language. Four options: 1st Audio, 2nd Audio, Subtitle, and Exit. Users can set
the language of 1st Audio, 2nd Audio, and Subtitle.
GMT Usage
Two options: Off, On.
Time Zone
This option is for users to select the time zone.
System Schedule
This option is for users to edit the TV or radio program schedule; it'll
automatically turn to the scheduled TV or radio program at the scheduled time.
After choosing System Schedule and pressing OK or
System Schedule. Users can set 10 tasks at most at the same time. When
entering the task mode, there are five options to set: Mode, Frequency,
Channel type, and Time setting.
Exit
Exit [DVB-T Setup Menu].
1.2 Digital TV
After choosing Digital TV on the main menu and pressing OK or
the mode of Digital TV.
Press MUTE to be silent, and then press again to get sound.
Press VOL+ or VOL- buttons to adjust volume while playing.
Press MENU button to get back to the main menu while playing.
Press TTX button to read the teletext message of the playing TV program
while playing. Press any key to exit it.
Press SUBTITLE button, it'll show the subtitle on the screen.
Press AUDIO button, it'll show the audio information on the screen.
Press EPG to enter the mode of electronic program guide. Users can get to
know the program list and information which is playing now and/or will be
played in the future. And users can edit the TV program schedule in the
mode.
, it'll enter the mode of
, it'll enter the mode of
, it'll enter
5