System Setting - Lenco DFT-1010 Manual Del Usuario

enter calendar setting interface.
Display
This option is to display Calendar . The date of calendar shown is set by
system. Except showing the present date, you can browse different months by
using , or checking different years by pressing
Set Date
You can set date of system.
Exit
Get back to [Accessories Menu].
3.2 Clock
It'll enter the clock setting interface, after choosing
Menu] and pressing OK or
3.3 Alarm
It'll enter the alarm setting interface , after choosing
Menu] and pressing OK or
4. Setup Menu

4.1 System Setting

Language Setup
OSD Language
This option is used to set OSD language.
Encoding
Two options: Western European, Central European.
Display Setup
Users can set up TV Standard, AV Output, Display type, Brightness, Contrast,
TFT Brightness, TFT Contrast and TFT Saturation in this menu.
Note
When users set the TV Standard, the TV format change could only be seen
on TV screen, but can not be seen on the engine screen.
Note
When users select the AV Output, there are two options: "TV", "Panel". When
you select "TV", then you could see the AV output function workable.
.
.
.
Clock in [Accessories
Alarm in [Accessories
8