Use And Operation; Adding Water - Klarstein 10029327 Manual Del Usuario

EN
14

USE AND OPERATION

Ensure all the packaging is removed and disposed of safely before connecting to the
main power supply.

Adding Water

Rotate the water tank knob 90 degree to open the water tank, pull out the water tank
and pour the water. After filling water, rotate the water tank knob 90 degree again to
lock the water tank. The water level is visible via the water level indicator on the front of
the unit.
Important: Do not overfill the water and keep within the MIN and MAX indicated
levels. Always lock the water tank after water has been added.
If you want to reduce the temperature of the air generated by the cooler the provided
ice packs can be used and added to the water tank.
Freezer packs
The supplied freezer packs are not suitable for cooling food down. Before you use them
for the first time, place them in the freezer compartment and leave them there for a few
hours until the contents are frozen. You can then put them in the water tank. Make sure
that the MAX level is not exceeded.
Important: Use the freezer packs only with this appliance and do not drink the
contents!