Use And Operation - Klarstein SKY HIGH Manual De Instrucciones

Fan body
Basie
Power cord
After the base is put on the fan body, follow the schematic
to secure the power cord under the base clip, then tighten
the screws.

USE AND OPERATION

Operate using a remote control (each button on the remote control is the same as
that of an actual fan):
On/Off
• When this button is pushed, the fan will start at a low speed.
• By pressing this button again, the fan will stop working.
2
Fixing
screw
3
Hold the clip and
forcibly pull the
base out, after the
clip comes out, use
the same method to
remove another clip.
EN
15