Hilti DX 36 Manual De Instrucciones página 41

Measurement uncertainty, K
Sound pressure emission, L
Measurement uncertainty, K
Noise values were determined in accordance with the noise measurement instructions in EN 15895-1, based
on the EN ISO 3744:1995 and EN ISO 11204:1995 standards.
en
NOTE The noise emissions measured and the associated measurement uncertainty represent the upper limit
for the noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
15.2 Vibration
Total vibration in accordance with 2006/42/EC does
not exceed 2.5 m/s .
36
Printed: 07.07.2013 | Doc-Nr: PUB / 5069831 / 000 / 00
pA
pC, peak
pC
2 dB
133 dB (C)
2 dB
Further information about user health and safety can
be found at www.hilti.com/hse.