Safety 1st One-Safe XT Manual Del Usuario página 26

not to interfere with the correct fi tting and
effectiveness of the child safety seat:
- Push the front passenger seat forward to
install the child safety seat in the rear of the
vehicle.
- Push the front passenger seat backwards
when installing in the front of the vehicle to
use the length of the front seat belt to
maximum advantage.
- Do not use carrier contact points other than
those described.
Care
Fabric:
• Before cleaning check the label sewn into the
fabric, you will fi nd the wash symbols indicating
the method of washing each item.
Washing symbols :
Shell:
• Clean the shell using a damp cloth.
Environment
Keep all plastic packaging materials out of
reach of your child to avoid the risk of
suffocation.
For environmental reasons, when you have
stopped using this product, we ask that you
dispose of the product in the proper waste
EN
0528968_Manual_OneSafeXT-XM_S1st_2014.indd 26
facilities in accordance with local legislatio-
Questions
If you have any questions, contact your local
Safety 1st retailer (see www.safety1st.com for
contact information). Make sure that you have
the following information on hand:
- Serial number at the bottom of the orange
ECE sticker
- Make and type of car and seat on which the
Safety 1st One-Safe XT/XM is used
- Age, height and weight of your child
26
15/07/13 09:35