Wayne Dalton Prodrive 3220C Instrucciones De Instalación Y Manual Del Propietario página 27

Mounting Door Bracket To
A 9700 Series Door
IMPORTANT:
Tools Needed:
TROLLEY TYPE GARAGE DOOR OPENER
TO A 9700 SERIES DOOR, A WAYNE-
Power Drill
DALTON OPENER/TROLLEY BRACKET
MUST BE SECURELY ATTACHED TO THE
7/16" Socket
TOP SECTION OF THE DOOR, ALONG WITH
Driver
ANY U-BARS PROVIDED WITH THE DOOR.
THE INSTALLATION OF THE OPENER MUST
BE ACCORDING TO MANUFACTURER'S
INSTRUCTIONS AND FORCE SETTINGS
MUST BE ADJUSTED PROPERLY.
Locate the center of the top section or
factory attached u-bar as shown in FIG 1.1.
FOR TOP SECTION WITH U-BAR:
Remove and retain 4-6 screws from the
center of the u-bar, allowing the door
bracket to slide between the section and the
u-bar.
Position the door bracket until it seats on
the male part of the section as shown in FIG
1.2. The door bracket must be centered and
positioned on the top section so it bridges
the transition point of the section thickness.
Attach the door bracket using
1/4" - 14 x 5/8" self tapping screws as
shown in FIG 1.4. Re-attach the u-bar using
(2) 1/4" - 20 x 11/16" self drilling screws
through the door bracket as shown in
FIG 1.3. Finish re-attaching the u-bar using
the self tapping screws removed previously.
FOR TOP SECTION WITHOUT U-BAR:
Position the door bracket until it seats on
the male part of the section as shown in FIG
1.2. The door bracket must be centered and
positioned on the top section so it bridges
the transition point of the section thickness.
Attach the door bracket using
1/4" - 14 x 5/8" self tapping screws as
shown in FIG 1.4.
NOTE: After completing this step, continue
with Step 7.
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
WHEN CONNECTING A
Door Bracket
Align Tab With Center
Line Of Top Section
Or Ubar
FIG. 1.1
Door Bracket
(2) 1/4"-20 x 11/16"
Self Drilling Screws
FIG. 1.3
Door Bracket
Top Section With U-Bar
Door Bracket
Top Section Without U-Bar
Male Part Of Top
Door Bracket
Section
FIG. 1.2
Door Bracket
(8) 1/4"-14 x 5/8"
Self Tapping Screws
FIG. 1.4
21