Maintenance - Quick BX 16 Manual Del Usuario

4 - Installation / Usage
4.2.1 THERMOSTAT ADJUSTMENT (in models provided)
The standard temperature value of the thermostat is 60°C. If you wish to change it, follow the instructions
below:
• shut down power supply.
• Remove the protection cover (14) in order to reach the thermostat (12).
• Adjust the thermostat knob with a screwdriver (fig. 4) and turn it to the required temperature.
• Replace on the protection cover (14).
• Switch on power supply.
F
The mixer controls the hot water temperature when the heating elements and the heat exchanger are
used.

5 - Maintenance

1
2
N. DENOMINAZIONE
1 Water Tank
2 Tank mounting
3 Tank mounting
4 Red plastic washer
5 White plastic washer
14
5
6 Blue plastic washer
7 Relief / non return valve
8 Hose clamp
9 Pipe
10 Electric element gasket
11A Electric element 1200W 220V
INSTALLATION AND USER MANUAL QUICK BX BOILER - REV007A
3
4
16
5
17
18
16
10
6
11
7
8
9
11B Electric element 500W 220V
11C Electric element 1200W 110V
11D Electric element 600W 110V
12 Double thermostat
13 Plastic spacing bar
14 Cap
12
13
14
15
15 Screw
16 Nuts
17 Ground cable terminal
18 Washer
BX
EN
BX