Kohler K-2732 Guía De Instalación Y Cuidado página 2

Tocador
Tabla de contenido

Publicidad

Tools/Outils/Herramientas
Plus/Plus/Más:
• Wood Screws/Vis à bois/Tornillos para madera
• 2x6s/Lambourde de 2x6/Postes de madera de 2x6
• 5/16" Lag Bolts and Washers [Min 250 lb (113.4 kg) Load Bearing]
Tire-fonds de 5/16" et rondelles [capacité de charge min 250 lb (113,4 kg)]
Pernos de fijación de 5/16" y arandelas [para carga mín de 250 lb (113,4 kg)]
• Socket Wrenches/Clés à douilles/Llaves de dados
• Wood Glue/Colle pour bois/Pegamento para madera
• Siliconized Acrylic Caulk/Mastic à l'acrylique siliconée/Sellador acrílico siliconado
Important Information
WARNING: Risk of property damage. Do not modify the vanity in any way.
Doing so will compromise the structural stability of the vanity and may cause
property damage.
WARNING: Risk of property damage. This product is packed with the stone top
down and with the lavatory in a carton inside the vanity cabinet. Use care and
avoid dropping parts when removing from packaging.
WARNING: Risk of property damage. The vanity is heavy and cumbersome to
move. Obtain sufficient help to lift or move the vanity to avoid impacting, sliding,
or side-loading the legs.
WARNING: Risk of property damage. Select 250 lb (113.4 kg) load bearing 5/16"
lag bolts with a length that can safely clear obstacles in the wall and 5/16"
washers. Calculate the proper length of the lag bolts by adding the following:
1-1/2" (3.8 cm) backing material + wallboard thickness + back rail thickness.
NOTICE: To avoid the risk of product damage, the finished wall must be straight and
plumb. If the finished wall is not straight and plumb, the vanity will not be properly
supported.
NOTICE: Putty or sealant may discolor the marble top. Use a damp cloth to remove
excess putty or sealant immediately after faucet and lavatory installation.
Observe all local plumbing and building codes.
Provide 2x6 backing material behind the finished wall to properly support the
vanity.
Informations importantes
AVERTISSEMENT: Risque d'endommagement du matériel. Ne pas modifier le
meuble de quelque manière que ce soit. Ceci compromettrait la stabilité du
meuble de toilette et pourrait causer des dommages matériels.
AVERTISSEMENT: Risque d'endommagement du matériel. Ce produit est
emballé avec le dessus de pierre tourné vers le bas et avec le lavabo dans un
carton à l'intérieur du meuble lavabo. Procéder avec soin et éviter de faire tomber
des pièces lors de leur retrait de l'emballage.
1146261-2-B
2
Kohler Co.

Publicidad

Tabla de contenido
loading

Tabla de contenido