Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSERT TONGUE INTO
VEHICLE'S HITCH.
IF SPARE TIRE CAUSES
INTERFERENCE, DO NOT
USE THIS PRODUCT!
Align the holes in the receiver
to the holes in the base.
ATTACH ARMS TO MAST.
Attach lock-washers and bolts.
Tighten bolts with 9/16" wrench.
1033248D-3/15
INSTALL LARGE BOLT
AND LOCK-WASHER.
Install bolt from right side
of receiver.
TIGHTEN with 7/8" wrench.
Insert coupling nuts into back of mast.
Attach one rubber strap to each
cradle and stabilizer.
PUSH THE SAFETY CLIP
ONTO THE EXPOSED
END OF THE BOLT.
stabilizer
To slide cradles along the
carrier arms, close cradle and
stabilizer. Close cradles while
loading bikes.
NOTE:
Publicidad
Tabla de contenido
