LUND Tube Step Instrucciones De Instalación

Inspection After Installation
• Ensure all fasteners are torqued to 18 ft-lbs (24 N-m).
• Periodically check all components for tightness.
Care and Cleaning
• Avoid the use of "brush style" car washes.
• Wash only with mild soap and water, dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
You have purchased one of the many quality Lund® branded products offered by Lund International, Inc.
We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish, and
ease of installation.
Lund International
300 Horizon Drive
Suwanee, GA 30024
800-328-5863 • Fax 800-782-5448 •Visit us at lundinternational.com
©2006 Lund International, Inc. All rights reserved.
Lund® and the Lund® logo are trademarks of Lund International, Inc.
Page 4 of 4
46028
Rev A
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863.
Important Safety Information
WARNING: • Torque all fasteners to 18 ft-lbs (24 N-m).
• Do not exceed 350 lbs (158 kg) on the Tube Step.
• Do not ride on the Tube Step while the vehicle is in motion.
• When using power tools be sure to read and understand all operating instructions.
• Wear safety glasses when using tools or when working under the vehicle.
• Periodically check all components for tightness.
CAUTION: • If you choose to paint the Tube Step we recommend professional painting.
Contents
Tools Required
Safety Glasses Socket Set
Installation Instructions
Tube Step
Tube Step
X2
5/16" Flat Washer 5/16-18 x 1 Square Head Bolt
(Pre-Installed in Tube Step)
X8 (54") X8 (54")
X12 (70") X12 (70")
X16 (80" & 90") X16 (80" & 90")
Wrench Set Torque Wrench
Page 1 of 4
46028
Rev A
Bracket Cover
X4 (54")
X6 (70")
X8 (80" & 90")
5/16-18 Lock Nut
X8 (54")
X12 (70")
X16 (80" & 90")
Floor Jack
(optional)