Descargar Imprimir esta página

EURO-PRO 9025 Manual De Instrucciones página 20

Publicidad

At the end of seam, press down the reverse sewing lever. Sew a
few reverse stitches. Release the lever and the machine will sew
A
forwards again. (Illustration #1, Fig.A.)
Al final de la costura apretar el boto n de retroceso. Coser
algunos puntos hacia atra s. Apenas se suelta el boto n, la
ma quina cose de nuevo hacia adelante. (1/A)
Turn the handwheel towards to bring the thread take up lever to
its highest position, raise the presser foot and remove work
1
2
towards the back. (2)
Colocar la palanca tensora del hilo en su posicio n ma s alta
(girar el volante hacia adelante), levantar el pie y retirar la labor
tirando hacia atra s. (2)
B
Cutting the thread:
Hold the threads behind the presser foot with both hands, guide
them to the slit "B" and press down. (3)
Sujetar los hilos con las dos manos detra s de la prensatela.
Hacerlos entrar en la ranura "B" de la barra prensatelas y tirar
los hilos hacia abajo hasta que se corten. (3)
3
16

Publicidad

loading